Product Description:
Chevrolet Camaro Rally Stripe Graphic Kit 4
Make your 2010-Current Chevrolet
Camaro tough looking with this great-looking twenty (20) piece Rally
Stripe Graphics kit.
The pieces in this kit are precut
and ready to install in a wide variety of colors.
This stripe package is not just a
set of straight strips in a box. Our graphic kit consists of prefitted and
contoured pieces with a classic 0.25" (6.35mm) pinstripe border as shown in the
illustration.
Graphics are specifically made for
the 2010-Current Chevrolet Camaro with factory Bumper, Hood, Rear Lid, Spoiler
and Rear Bumper areas as shown and will not fit any other vehicle.
Stripe package is manufactured for a
center spacing of 3" (7.62cm) at time of installation.
Includes easy-to-follow general
online instructions.
|
Notes |
| Factory Ground
Effects Kit #ATD-CHVCMROGRPH27 consists of
four (4) precut pieces. Slight trimming of main kit's Front Valance and Rear
Bumper pieces may be required at time of installation. |
| Trimmable
Spoiler Kit #ATD-CHVCMROGRPH28 consists of two (2) pieces 16" (40.64cm) in
length that can be trimmed during installation for custom spoiler
applications. |
'Click' Here for larger image with
close-ups.
An additional
handling charge of $6.00 shall apply due to size and weight of shipping package.
Share on Facebook
|