Rapid Tac II will enable you to perform wet applications with a wider variety of film types (Intermediate, Cast, Economy, Calendared, Metallic, Reflective, Polyester, Mylar).This product will also give you better control, allowing vinyl to bond faster to glass, and in cold weather (down to approximately 25 degrees Fahrenheit)
This environmentally friendly product is great for installing all types of decals, vinyl graphics and InvisiGARD® Paint & Headlight Protection. Granted, not all applications call for a "wet" procedure, but we do know that in most applications, forty to sixty percent labor time can be saved by using an application fluid. Sometimes one person can do a job (normally requiring two people to apply dry) in less time if an application fluid like Rapid Tac II is used.
Application fluid cleans without leaving residues. It then helps to "float" the vinyl until it is properly positioned. Best of all Rapid Tac II stimulates the adhesive to bond in approximately ninety seconds, even in adverse climates such as extreme hot or cold. It will not cause bubbles so there's no returning to poke holes in your work either. Your customers and your reputation will benefit from higher-quality applications.
Please Note: Rapid Tac II is not a replacement for the Original Rapid Tac, and may bond too fast with "Premium Cast" films in warmer climates.
Provided in two convenient bottle sizes. Easy-to-follow instructions clearly outlined on the bottle.
What Bottle Size Should I Order?
|4 oz. Bottle with Sprayer
||Small & Medium decal/graphic and InvisiGARD® installations.
|32 oz. Bottle with Sprayer
||Large graphic and InvisiGARD® installations.
'Click' Here for detailed instructions.