Our 3 mil transparent film is a flexible vinyl material that adds a unique look to headlights, tail lights and fog lamps1.
Adding this film not only adds style, it can also protect from abrasion.
Precut and easy to apply, the film stretches2 easily over irregular shapes with heat. Available in two (2) darkness levels.
Middle Grey #074 (Lighter) - Visible Light Transmittance = 50%
Dark Grey #073 (Darker) - Visible Light Transmittance = 27% (shown in image)
Application tool(s) and/or fluids must be ordered separately.
'Click' Here to check out our detailed Instructional Video in regard to Headlights and Tail Lights.
|Kit Application Chart
||Kit Part Number
||Headlights, Fogs and Directionals
1Please check your local/state laws and ordinances prior to application.
2The multi-contoured nature of some headlight shapes require heating and stretching into place. Once applied, careful trimming may be required.
Application Note: Most headlamp lenses and assemblies are manufactured from plastic materials. After the lense is molded to itís current shape, a protective clear is sprayed onto the surface and subsequently baked to harden.
The following link to a YouTube video show the complete process of Headlamp manufacturing: https://youtu.be/KoBfqvSZN7c
As the vehicle and headlamp lense ages, factors such as atmospheric conditions (sun, rain, cold) as well as outside occurrences (road debris [sand, rocks, etc.]) deteriorate the clearcoat initially sprayed onto the plastic during the manufacturing process.
Thus, in most cases, this leaves the plastic lense exposed which allows the material to haze as well as release more and more of the protective clearcoat.
Extra care is required for vehicles older than one (1) year so as to not peel the existing clearcoat. Liberal use of application fluid as well as limited re-positioning, if any, will assist in a successful installation.