Rally Stripe Graphic "Build-a-Kit" 1 for '05-'09 Ford Mustang
With the popularity of the '05-'09 Ford Mustang and the myriads of aftermarket products available, we found it necessary of provide our customer with the option to build their own kit with the many options available in our line of precut Rally Graphic Striping kits.
Available in a wide variety of colors, our kits are not just a box of simple 10" (25.40cm) straight strips. Graphic kits consist of prefitted and contoured pieces as illustrated on detailed Parts Lists.
'Click' here to view our "Build-a-Kit" Parts List area for this product.
Easy Order ~ Simply start with the Front Bumper and work your way to the Rear Bumper. If you do not need a certain area covered, simply select "No Kit Desired".
Price shown is based on a Mustang Coupe Roof Kit with 1" (25.40mm) spacing. Final cost will reflect color and kit choices you select.
Don't see a kit for your application? Contact Us and we'll do our best to assist!
Rally Stripe Graphic kits offered are based on a 10" (25.40cm) width (nominal).
Kits offered, for the most part, are available for 1" (25.40mm) or 2" (50.80mm) center spacing. Kits DO NOT come pre-spaced. Center spacing shall be set at time of installation.
While effort has been made to create kits that require little to no trimming, we cannot guarantee fitment consistency of aftermarket fiberglass or urethane products. Thus, slight trimming may be required subsequent to graphic installation.
Most pieces in each kit are fitted to come within 0.0625" to 0.125" (1.5875-3.175mm) of vehicle panel ends/edges. We do not recommend wrapping graphic pieces over ends or edges of body panels. Thus, kit pieces have been designed accordingly.
Trimmable one (1) piece Hood Scoop Kit (ATD-FRDMSTNGGRPH121) consist of one (1) 21" x 29" (53.34cm x 73.66cm) piece that can be hand trimmed for most hood scoop applications. Trimmable two (2) piece Hood Scoop Kit (ATD-FRDMSTNGGRPH45) includes two (2) 10.75" x 40" (27.31cm x 101.60cm) pieces that can be hand trimmed for most hood scoop applications.
Trimmable two (2) piece Spoiler Kit (ATD-FRDMSTNGGRPH43) includes two (2) 11" x 16" (27.94cm x 40.64cm) pieces that can be hand trimmed for custom spoiler applications.